Gigabyte 5AX - Page 71

BIOS Configuration
4-15
• DRAM Timing
The default value is Normal.
Normal For normal DRAM timing operation.
Fast For Faster DRAM timing operation.
Slow For Slower DRAM timing operation.
•
SDRAM CAS Latency
The default value is AUTO.
3 For Slower SDRAM DIMM module.
2 For Faster SDRAM DIMM module.
Auto CAS latency time will be set automatically if you have SPD
on SDRAM
•
Pipelined Function
The default value is Enable.
Enable Enable Pipelined Function.
Disable Disable Pipelined Function.
• Graphics Aperture Size
The default value is 64MB.
16MB Set Graphics Aperture Size to 16MB.
32MB Set Graphics Aperture Size to 32MB.
64MB Set Graphics Aperture Size to 64MB.
128MB Set Graphics Aperture Size to 128MB.
256MB Set Graphics Aperture Size to 256MB.
•
DRAM Data Integrity Mode
The default value is Disable.
ECC Set DRAM Data Integrity Mode to ECC Mode.
(only work at 66, 75 MHz)
Parity Set DRAM Data Integrity Mode to Parity Mode.
(only work at 66, 75 MHz)
Disable Disable DRAM Data Integrity Mode.