Gigabyte 5AX - Page 72

5AX
4-16
• Memory Hole at 15M-16M
The default value is Disabled.
Enabled Set Address=15-16MB relocate to ISA BUS.
Disabled Normal Setting.
•
ISA Line Buffer
The default value is Enabled.
Enabled Enable ISA Line Buffer.
Disabled Disable ISA Line Buffer.
• Passive Release
The default value is Enabled.
Enabled Enable Passive Release.
Disabled Disable Passive Release.
• Delay Transaction
The default value is Disabled.
Enabled Enable Delay Transaction.
Disabled Disable Delay Transaction.
•
Primary Frame Buffer
The default value is 2MB.
1MB Set Primary Frame Buffer to 1MB.
2MB Set Primary Frame Buffer to 2MB.
4MB Set Primary Frame Buffer to 4MB.
8MB Set Primary Frame Buffer to 8MB.
16MB Set Primary Frame Buffer to 16MB.
ALL Set Primary Frame Buffer to ALL.
Disabled Disable Primary Frame Buffer.
• VGA Frame Buffer
The default value is Enabled.
Enabled Enable VGA Frame Buffer.
Disabled Disable VGA Frame Buffer.