Gigabyte 5AX - Page 73

BIOS Configuration
4-17
• Data Merge
The default value is Disabled.
Enabled Enable Data Merge.
Disabled Disable Data Merge.
•
IO Recovery Period
The default value is 1 us.
0 us~ 3 us It’s recommended not to program the period longer than 1
us.
• Auto Detect DIMM/PCI Clk
The default value is Enabled.
Enabled Enabled Auto Detect DIMM/PCI Clk.
Disabled Disabled Auto Detect DIMM/PCI Clk.
•
Spread Spectrum
The default value is 0.6% (CNTR)
Disabled Normal
0.6%(CNTR) Set Spread Spectrum 0.6%(Center Spread) for
reducing EMI effect.