Gigabyte 5AX - Page 86

5AX
4-30
• Onboard Parallel port
The default value is 378/IRQ7
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7.
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Disabled Disable onboard LPT port.
• Parallel port Mode
The default value is SPP
SPP
Using Parallel port as Standard Parallel Port
EPP
Using Parallel port as Enhanced Parallel Port.
ECP
Using Parallel port as Extended Capabilities Port.
EPP+ECP
Using Parallel port as ECP & EPP mode.
• KB PWR ON/OFF Function
The default value is Power Key
Power Key Support Win98 Keyboard Power ON/OFF Function.
Enabled Enabled KB PWR ON/OFF Function
Disabled Disabled KB PWR ON/OFF Function
KB PWR ON/OFF Password
The default value is Enter.
MKB PWR ON/OFF Function Set Enabled, KB PWR ON/OFF Password : Enter
will show up. When users enabled KB PWR ON/OFF Function, please set
password with three different characters, and press the three different
characters password at the same time.
For example, if users set “abc”as password , then he would press
“a” “b” “c” at the same time. (a-b-c is hot key) .