Gigabyte AORUS FI25F - System: Hot Keys and Other Settings; Quick Switch Functionality; Other System Settings; LED Indicator and DisplayPort Version

LCD Monitor User's Manual
-
39
-
Item Description
Quick Switch Assign the function of the hot keys.
Available options: Aim Stabilizer, Black Equalizer, Low Blue Light,
Volume, Input, Contrast, Brightness, and Picture Mode.
The default setting of the hot keys as below:
Up ( ) : Black Equalizer
Down ( ): Picture Mode
Right ( ) : Input
Left ( ): Volume
Other Settings • Resolution Notice: When this function is enabled, the current
resolution message will appear on the screen when the monitor
switches to another input source.
• Input Auto Switch: When this function is enabled, it
automatically switches to an available input source.
• Auto Power O: When this function is enabled, the monitor
will automatically turn o after a certain amount of time.
Other Settings
(continue
)
• LED Indicator: By default, the LED indicator is set to ON.
LED Indicator OFF: Turn o the Power LED.
LED Indicator ON: The Power LED lights white during
operation and lights orange in standby mode.
LED Indicator Friendly: The Power LED lights orange in
standby mode.
When the power supply is switched o, the Power LED will
remain o.
• DisplayPort Ver.: Set the DisplayPort version to 1.1, 1.2+HDR
Note:
• Make sure to configure this option based on the DisplayPort
version supported by your graphics card.