Gigabyte AORUS FI27Q-X - Page 39

- 39 -
LCD Monitor User’s Manual
Item Description
Quick Switch Assign the function of the hot keys.
Available options: Aim Stabilizer, Black Equalizer 2.0,
Low Blue Light, Volume, Input, Contrast, Brightness,
and Picture Mode.
The default setting of the hot keys as below:
D Up ( ): Black Equalizer 2.0
D Down ( ): Picture Mode
D Right ( ): Input
D Left ( ): Volume
Other Settings • Resolution Notice: When this function is enabled,
the recommended resolution message will appear
on the screen when the monitor switches to
another input source.
• Input Auto Switch: When this function is enabled,
it automatically switches to an available input
source.
• Auto Power OFF: When this function is enabled,
the monitor will automatically turn o after a
certain amount of time.
• LED Indicator: By default, the LED indicator is set
to Always ON.
D Always ON: The Power LED lights white during
operation and lights orange in standby mode.
D Always OFF: Turn o the Power LED.
D Standby ON: The Power LED lights orange in
standby mode.
D When the power supply is switched o, the
Power LED will remain o.