- 22 -
Gaming Monitor User Guide
USING THE DEVICE
Turning the Power On/O
Power On
1. Connect one end o the power cable to the AC IN jack at the rear o
the monitor.
2. Connect other end o the the power cable to a power outlet.
3. Press the Control button to turn on the monitor. The Power LED will
light in white, indicating the monitor is ready to use.
Note: I no signal, the monitor will show No Signal notication or a while.
Then, the monitor will go to power saving mode and the Power LED lights
white and starts blinking with a period o one second.
Power O
Press the Control button or 2 seconds to turn o the monitor.
Note: When the Main menu appears on the screen, you can also turn o the
monitor by moving the Control button down ( ). Reer to page 26.