Gigabyte G293-Z42-AAP1 - Page 112

BIOS Setup
- 112 -
Parameter Description
ECC Conguration
Press [Enter] to congure advanced items.

DRAM ECC Symbol Size
– Congures the DRAM ECC Symbol Size.
– Options available: Auto, x4, x8, x16. Default setting is Auto.

DRAM ECC Enable
– Enable/Disable DRAM ECC. When set to Auto, it will set ECC
to enable.
– Options available: Auto, Enabled, Disabled. Default setting is
Auto.

DRAM UECC Retry
– Enable/Disable DRAM UECC Retry.
– Options available: Auto, Enabled, Disabled. Default setting is
Disabled.

Max DRAM UECC Error Replay
(Note)
– Default setting is 8.

Memory Clear
– Options available: Auto, Enabled, Disabled. Default setting is
Auto.

Address XDR after ECC
– Options available: Auto, Enabled, Disabled. Default setting is
Disabled.
(Note) This item available when DRAM UECC Retry is set to Enabled.