Gigabyte G482-Z50 - Page 14

Hardware Installation - 14 -
System
Management
 Aspeed® AST2500 management controller
 AMI MegaRAC SP-X Solution web interface
 Dashboard
 JAVA Based Serial Over LAN
 HTML5 KVM
 Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
 Sensor Reading History Data
 FRU Information
 SEL Log in Linear Storage / Circular Storage Policy
 Hardware Inventory
 Fan Prole
 System Firewall
 Power Consumption
 Power Control
 LDAP / AD / RADIUS Support
 Backup & Restore Conguration
 Remote BIOS/BMC/CPLD Update
 Event Log Filter
 User Management
 Media Redirection Settings
 PAM Order Settings
 SSL Settings
 SMTP Settings
OS
Compatibility
 Windows: Windows Server 2016 (X2APIC / 256T not supported)
 Windows Server 2019 (with KB4490481)
 Red Hat Enterprise Linux 7.6 (x64) or later
 Red Hat Enterprise Linux 8.0 (x64) or later
 SUSE Linux Enterprise Server 12 SP4 (x64) or later
 SUSE Linux Enterprise Server 15 SP1 (x64) or later
 Ubuntu 18.04 LTS (x64) or later
 VMware ESXi 6.5 Update3 or later
 Citrix Xenserver 7.1.0 CU2 or later
Power Supply
 3 x 2200W redundant PSU
 80 PLUS Platinum
 AC Input:
- 100 - 127V / 14A, 47 - 63Hz
- 200 - 240V / 12.6A, 47 - 63Hz
 DC Output:
- Max. 1200W / 100 - 127V: +12.12V / 95.6A, +12Vsb / 3.5A
- Max. 2200W / 200 - 240V: +12.12V / 178.1A, +12Vsb / 3.5A
NOTE: The system power supply requires C19 type power cord.