7IXE4 Motherboard
45
Integrated Peripherals
Figure 10: Integrated Peripherals
*This item will be available when “Serial PortB Mode” set to IrDA.
**This item will be available when “Onboard Parallel Port” set to 378, 278 or 3BC.
#This item will be available when “Onboard Parallel Port” set to 378, 278 and “Parallel Mode” set to
ECP.
•
OnBoard IDE
Disabled Disabled OnBoard IDE.
Both Set OnBoard IDE is Both.
(Default Value)
Primary Set OnBoard IDE is Primary.
Secondary Set OnBoard IDE is Secondary.
•
OnBoard FDC
Auto Set OnBoard FDC is Auto.
(Default Value)
Disabled Disabled OnBoard FDC.
Enabled Enabled OnBoard FDC.
AMIBIOS SETUP – INTEGRATED PERIPHERALS
( C ) 1999 American Megatrends, Inc. All Rights Reserved
OnBoard IDE
Both
OnBoard FDC
Auto
OnBoard Serial Port A
Auto
OnBoard Serial Port B
Auto
Serial PortB Mode
Normal
*IR Duplex Mode
N/A
OnBoard Parallel Port
Auto
Parallel Port Mode ECP
**Parallel Port IRQ Auto
# Parallel Port DMA Auto
ESC: Quit
↑↓→
←
: Select Item
F1 : Help PU/PD+/-/ : Modify
F5 :Old Values (Shift)F2:Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
To Next Page
Loading...
