7IXE4 Motherboard
59
Appendix B: BIOS Flash Procedure
BIOS update procedure:
9
Please check your BIOS vendor (AMI or AWARD) on the motherboard.
9
It is recommended you copy the AWDFlash.exe or AMIFlash.exe in driver CD
(D:\>Utility\BIOSFlash) and the BIOS binary files into the directory you made in your hard
disk. 【i.e:C:\>Utility\ (C:\>Utility : denotes the driver and the directory where you put the flash
utilities and BIOS file in.)】
9
Restart your computer into MS-DOS mode or command prompt only for Win95/98, go into
the directory where the new BIOS file are located use the utility AWDFlash.exe or
AMIFlash.exe to update the BIOS.
9
Type the following command once you have enter the directory where all the files are located
C:\utility\ AWDFlash or AMIFlash <filename of the BIOS binary file intended for flashing>
9
Once the process is finished, reboot the system
0
Note: Please download the newest BIOS from our website (www.gigabyte.com.tw) or contact
your local dealer for the file.
To Next Page
Loading...
