Gigabyte GA-A75N-USB3 - Clear CMOS Jumper

- 27 - Hardware Installation
13) CLR_CMOS (Clearing CMOS Jumper)
Use this jumper to clear the CMOS values (e.g. date information and BIOS congurations) and reset the
CMOS values to factory defaults. To clear the CMOS values, use a metal object like a screwdriver to touch
the two pins for a few seconds.
Open: Normal
Short: Clear CMOS Values
Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS •
values.
After system restart, go to BIOS Setup to load factory defaults (select Load Optimized Defaults) or manually •
congure the BIOS settings (refer to Chapter 2, "BIOS Setup," for BIOS congurations).