Gigabyte GA-A75N-USB3 - Page 56

Unique Features - 56 -
Step 3:
When partitioning your hard drive, make sure to leave
unallocated space (10 GB or more is recommended;
actual size requirements vary, depending on the
amount of data) and begin the installation of the
operating system.
Step 4:
After the operating system is installed, click Start,
right-click the Computer and select Manage. Go to
Disk Management to check disk allocation.
Step 5:
Xpress Recovery2 will save the backup le to the unallocated
space (black stripe along the top). Please note that if there is no
enough unallocated space, Xpress Recovery2 cannot save the
backup le.
Step 1:
Select BACKUP to start backing up your hard drive
data.
Step 2:
When nished, go to Disk Management to check
disk allocation.
B. Accessing Xpress Recovery2
1. Boot from the motherboard driver disk to access Xpress Recovery2 for the rst time. When you see the
following message: Press any key to startup Xpress Recovery2, press any key to
enter Xpress Recovery2.
2. After you use the backup function in Xpress Recovery2 for the rst time, Xpress Recovery2 will stay
permanent in your hard drive. If you wish to enter Xpress Recovery2 later, simply press <F9> during the
POST.
C. Using the Backup Function in Xpress Recovery2
Xpress Recovery2 will automatically create a new
partition to store the backup image le.