EasyManua.ls Logo

Gigabyte GA-B75M-D3P - Internal Graphics; Trusted Computing

Gigabyte GA-B75M-D3P
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 37 -
& Init Display First
Specifes the frst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics
card, or the onboard graphics.
Auto LetsBIOSautomaticallycongurethissetting.(Default)
IGFX Setstheonboardgraphicsastherstdisplay.
PEG SetsthePCIExpressgraphicscardonthePCIEX16slotastherstdisplay.
PCI SetsthegraphicscardonthePCIslotastherstdisplay.
& Internal Graphics
Enablesordisablestheonboardgraphicsfunction.(Default:Auto)
& Internal Graphics Memory Size
Allowsyoutosettheonboardgraphicsmemorysize.Optionsare:32M~1024M.(Default:64M)
& DVMT Total Memory Size
AllowsyoutoallocatetheDVMTmemorysizeoftheonboardgraphics.Optionsare:128M,256M,MAX.
(Default:MAX)
& Intel(R) Rapid Start Technology
EnablesordisablesIntelRapidStartTechnology.ThisitemiscongurableonlywhenanSSDisinstalled.
(Default:Disabled)
& Legacy USB Support
AllowsUSBkeyboard/mousetobeusedinMS-DOS.(Default:Enabled)
& XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support.(Default:Enabled)
& EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support.(Default:Disabled)
& Port 60/64 Emulation
Enables or disables emulation of I/O ports 64h and 60h. This should be enabled for full legacy support
for USB keyboards/mice in MS-DOS or in operating system that does not natively support USB devices.
(Default:Disabled)
& USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
` Trusted Computing
& TPM SUPPORT
EnablesordisablesTrustedPlatformModule(TPM).SetthisitemtoEnable when a TPM device is installed.
(Default:Disable)
& OnBoard LAN Controller#1
EnablesordisablestheonboardLANfunction.(Default:Enabled)
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled.
` ASFConguration
EnablesordisablestheAlertStandardFormat2.0(ASF2.0)networkmanagementcapabilitiesoftheRealtek
LAN chip. Enabled allows for remote control and alerting of computer systems in OS-absent environments.
(Default:Enabled)
` MCTPConguration
EnablesordisablestheManagementComponentTransportProtocol(MCTP)fortheRealtekLANchip.
(Default:Disabled)

Related product manuals