Gigabyte GA-E350N-USB3 - Standard CMOS Features

- 35 - BIOS Setup
Date (mm:dd:yy)
 Setsthesystemdate.Thedateformatisweek(read-only),month,dateandyear.Selectthedesiredeld
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
 Setsthesystemtime.Forexample,1p.m.is13:0:0.Selectthedesiredeldandusetheuparrowor
down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
IDE Channel 0, 1 Master/Slave
 CongureyourSATAdevicesbyusingoneofthetwomethodsbelow:
• Auto Lets the BIOS automatically detect SATA devices during the POST. (Default)
• None If no SATA devices are used, set this item to None so the system will skip
the detection of the device during the POST for faster system startup.
Access Mode Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
 Thefollowingeldsdisplayyourharddrivespecications.Ifyouwishtoentertheparametersmanually,
refer to the information on the hard drive.
Capacity Approximate capacity of the currently installed hard drive.
Cylinder Number of cylinders.
Head Number of heads.
Precomp Write precompensation cylinder.
Landing Zone Landing zone.
Sector Number of sectors.
2-4 Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Standard CMOS Features
Date (mm:dd:yy) Wed, Dec 29 2010
Time (hh:mm:ss) 22:31:24

 IDEChannel0Master   [None]

 IDEChannel0Slave   [None]

 IDEChannel1Master   [None]

 IDEChannel1Slave   [None]
Halt On    [All,ButKeyboard]
 BaseMemory    640K
Extended Memory 766M
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
