Gigabyte GA-E350N-USB3 - Power Management Setup

BIOS Setup - 42 -
ACPI Suspend Type
 SpeciestheACPIsleepstatewhenthesystementerssuspend.
S3(STR) Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state. (Default)
Soft-Off by Power button
 ConguresthewaytoturnoffthecomputerinMS-DOSmodeusingthepowerbutton.
Instant-Off Press the power button and then the system will be turned off instantly. (Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
USB Wake Up from S3
Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the installed USB
device. (Default: Enabled)
Modem Ring Resume
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a modem that
supports wake-up function. (Default: Disabled)
PME Event Wake Up
Allows the system to be awakened from an ACPI sleep state by a wake-up signal from a PCI or PCIe de-
vice. Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
(Default: Enabled)
HPET Support
(Note)
Enables or disables High Precision Event Timer (HPET) for Windows 7/Vista operating system.
(Default: Enabled)
(Note) Supported on Windows 7/Vista operating system only.
2-7 Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Power Management Setup
 ACPISuspendType   [S3(STR)]
 Soft-OffbyPowerbutton  [Instant-off]
 USBWakeUpfromS3  [Enabled]
 ModemRingResume   [Disabled]
 PMEEventWakeUp   [Enabled]
HPET Support
(Note)
   [Enabled]
 PowerOnByMouse   [Disabled]
 PowerOnByKeyboard  [Disabled]
x KBPowerONPassword  Enter
 ACBackFunction   [Soft-Off]
 Power-OnbyAlarm   [Disabled]
x Date (of Month) Everyday
x Resume Time (hh:mm:ss) 0 : 0 : 0
 ErPSupport    [Disabled]
higf
: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level
