Gigabyte GA-F2A55-DS3 - Page 27

- 27 -
& AMDMemoryProle(A.M.P.)
(Note)
 AllowstheBIOStoreadtheSPDdataonAMPmemorymodule(s)toenhancememoryperformancewhen
enabled.
Disabled  Disablesthisfunction.(Default)
Prole1  UsesProle1settings.
Prole2
(Note)
 UsesProle2settings.
& System Memory Multiplier (SPD)
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data.(Default:Auto)
& Memory Frequency (MHz)
 ThisvalueisautomaticallyadjustedaccordingtotheBCLK/PCIe Clock Control and System Memory
Multiplier settings.
` AdvancedMemorySettings
& AMDMemoryProle(A.M.P.)
(Note)
, System Memory Multiplier (SPD), Memory
Frequency(MHz)
The settings above are synchronous to those under the same items on the AdvancedFrequencySettings
menu.
& DRAM Timing Selectable
Quick and Expertallowsthememorytimingsettingsbelowtobecongurable.Optionsare:Auto(default),
Quick, Expert.
& ProleDDRVoltage
When using a non-AMP memory module or AMDMemoryProle(A.M.P.) is set to Disabled, this item will
display as 1.50V. When AMDMemoryProle(A.M.P.) is set to Prole1 or Prole2, this item will display
the value based on the SPD data on the AMP memory.
& ProleVTTVoltage
The value displayed here is dependent on the CPU being used.
& RankInterleaving
Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different
ranksofthememorytoincreasememoryperformanceandstability.(Default:Enabled)
(Note) Thisitemispresentonlywhenyouinstallamemorymodulethatsupportsthisfeature.