Gigabyte GA-F2A55-DS3 - Integrated Graphics

- 37 -
` GFXConguration
& PrimaryVideoDevice
 SpeciestherstinitiationofthemonitordisplayfromtheinstalledPCIExpressgraphicscardortheonboard
graphics.
IGDVideo   Setstheonboardgraphicsastherstdisplay.
NB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
NorthBridgeastherstdisplay.(Default)
SB PCIe Slot Video Sets the PCI Express graphics card on the PCI Express slot controlled by the
SouthBridgeastherstdisplay.
& Integrated Graphics
Enables or disables the onboard graphics function.
Auto The BIOS will automatically enable or disable the onboard graphics depending on
thegraphicscardbeinginstalled.(Default)
Disabled Disables the onboard graphics.
Force Always activates the onboard graphics, whether or not a PCI Express card is
installed.
& UMA Frame Buffer Size
 ThisitemiscongurableonlywhenIntegrated GraphicsissettoForce.Framebuffersizeisthetotal
amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will
useonlythismemoryfordisplay.Optionsare:Auto(default),256M,512M,1G,2G.
` SuperIOConguration
 ThissectionprovidesinformationonthesuperI/Ochipandallowsyoutoconguretheserialport.
& Serial Port A
 Enablesordisablestheonboardserialport.(Default:Enabled)