Gigabyte GA-F2A55-DS3 - Page 30

- 30 -
& CPU Vcore/Dram Voltage/+3.3V/+5V/+12V
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/SystemFANSpeed
Displays current CPU/system fan speeds.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
willemitwarningsound.Optionsare:Disabled(default),60
o
C/140
o
F, 70
o
C/158
o
F, 80
o
C/176
o
F, 90
o
C/194
o
F.
& CPU/System Fan Fail Warning
Allows the system to emit warning sound if the CPU fan or system fan are not connected or fail. Check
thefanconditionorfanconnectionwhenthisoccurs.(Default:Disabled)
& CPU Fan Control Mode
Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU
fancontrolmode.(Default)
Voltage Sets Voltage mode for a 3-pin CPU fan.
PWM Sets PWM mode for a 4-pin CPU fan.
& CPU Fan Speed Control
 AllowsyoutodeterminewhethertoenabletheCPUfanspeedcontrolfunctionandadjustthefanspeed.
Normal Allows the CPU fan to run at different speeds according to the CPU temperature. You can
adjustthefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)
Silent Allows the CPU fan to run at slow speeds.
Manual Allows you to control the CPU fan speed under the Slope PWM item.
Disabled Allows the CPU fan to run at full speeds.
& Slope PWM
 AllowsyoutocontroltheCPUfanspeed.ThisitemiscongurableonlywhenCPU Fan Speed Control is
set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.
& 1st/2nd/3rd System Fan Speed Control
Allows you to determine whether to enable the system fan speed control function for the system fan
connectedtotheSYS_FAN1~3connectorandadjustthefanspeed.
Normal Allows the system fan to run at different speeds according to the system temperature. You
canadjustthefanspeedwithEasyTunebasedonyoursystemrequirements.(Default)
Silent Allows the system fan to run at slow speeds.
Manual Allows you to control the system fan speed under the Slope PWM item.
Disabled Allows the system fan to run at full speeds.
& Slope PWM
 Allowsyoutocontrolthesystemfanspeed.Thisitemiscongurableonlywhen1st/2nd/3rd System Fan
Speed Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM value /
o
C.