Gigabyte GA-F2A88X-D3HP - Page 57

- 57 -
Conguring a RAID Set
ToexittheUEFIRAIDutility,enter"exit"andpress<Enter>.
Deleting an Array
To delete an array, enter the following commands and press <Enter>.
rcadm -D -a 1 (Figure7)
("D"=Deleteaarray,"a1"=Array1,todeleteallarrays,enter"a*")
Whenpromptedtoconrm,enterYES to delete or NO to cancel, and then press <Enter>.
fs0:\>rcadm -D -a 1
Delete Array 1, are you sure?(YES, NO): yes
deleting array 1
deleting array //./Core1/Route0/Device 1
fs0:\>
Figure 7