Gigabyte GA-F2A88X-D3HP - Troubleshooting; Frequently Asked Questions

- 87 -
Appendix
6-2 Troubleshooting
6-2-1 FrequentlyAskedQuestions
To read more FAQs for your motherboard, please go to the Support\FAQ page on GIGABYTE's website.
Q: Whyisthelightofmykeyboard/opticalmousestillonafterthecomputershutsdown?
A: Some motherboards provide a small amount of standby power after the computer shuts down and that's why the light is still
on.
Q: How do I clear the CMOS values?
A: For motherboards that have a Clear CMOS button, press this button to clear the CMOS values (before doing this, please
turnoffthecomputerandunplugthepowercord).FormotherboardsthathaveaClearCMOSjumper,refertotheinstruc-
tionsinChapter1toshortthejumpertocleartheCMOSvalues.Ifyourboarddoesn'thavethisjumper/button,refertothe
instructions on the motherboard battery in Chapter 1. You can temporarily remove the battery from the battery holder to stop
supplying power to the CMOS, which will clear the CMOS values after about one minute.
Q: Why do I still get a weak sound even though I have turned my speaker to the maximum volume?
A: Makesureyourspeakerisequippedwithaninternalamplier.Ifnot,tryaspeakerwithpower/amplier.