Gigabyte GA-F2A88X-D3HP - Configuring S;Pdif Out

- 83 -
Appendix
(Note) Enterthe Digital Output(Optical) screentoconfigurefurthersettings if you use theS/PDIFOut
connector(s)onthebackpanelfordigitalaudiooutputorentertheDigital Output screen if you use
theinternalS/PDIFOutconnector(SPDIF_O)fordigitalaudiooutput.
TheS/PDIFOutjackcantransmitaudiosignalstoanexternaldecoderfordecodingtogetthebestaudioquality.
1.ConnectingaS/PDIFOutCable:
ConnectaS/PDIFopticalcabletoanexternaldecoderfortransmittingtheS/PDIFdigitalaudiosignals.
2.ConfiguringS/PDIFOut:
On the Digital Output(Optical) screen
(Note)
, click the Default Format tab and then select the sample rate and
bit depth. Click OK to complete.
ConnectstoaS/PDIFopticalcable
6-1-2 ConguringS/PDIFOut