Gigabyte GA-F2A88X-D3HP - Power Management

BIOS Setup
- 50 -
2-7 Power Management
& Resume by Alarm
 Determineswhethertopoweronthesystematadesiredtime.(Default:Disabled)
If enabled, set the date and time as following:
Wakeupday:Turnonthesystemataspecictimeoneachdayoronaspecicdayinamonth.
Wakeuphour/minute/second:Setthetimeatwhichthesystemwillbepoweredonautomatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& HPET Timer
 EnablesordisablesHighPrecisionEventTimer(HPET)forWindows10/8.1/7operatingsystem.(Default:
Enabled)
& Soft-Off by PWR-BTTN
 ConguresthewaytoturnoffthecomputerinMS-DOSmodeusingthepowerbutton.
Instant-Off  Pressthepowerbuttonandthenthesystemwillbeturnedoffinstantly.(Default)
Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
& AC BACK
Determines the state of the system after the return of power from an AC power loss.
Memory The system returns to its last known awake state upon the return of the AC power.
Always On The system is turned on upon the return of the AC power.
AlwaysOff  ThesystemstaysoffuponthereturnoftheACpower.(Default)
& Power On By Keyboard
 AllowsthesystemtobeturnedonbyaPS/2keyboardwake-upevent.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Disabled  Disablesthisfunction.(Default)
Password Set a password with 1~5 characters to turn on the system.
Keyboard98 PressPOWERbuttonontheWindows98keyboardtoturnonthesystem.
Any key Press any key to turn on the system.