Gigabyte GA-P75-D3 - Page 72

Appendix - 72 -
The pictures to the right show the 7.1-channel speaker
configurations.
7.1-Channel Speakers:
Center/Subwoofer
Speaker Out
Front Speaker
Out
Rear Speaker Out
Side Speaker Out
Step 2:
Connect an audio device to an audio jack. The Thecurrent
connecteddevice is dialog box appears. Select the
device according to the type of device you connect. Then
click OK.
Step 3:
On the Speakers screen, click the SpeakerConfiguration
tab. In the Speaker Configuration list, select Stereo,
Quadraphonic, 5.1Speaker, or 7.1Speaker according to
the type of speaker configuration you wish to set up. Then
the speaker setup is completed.
B.ConfiguringSoundEffect
You may configure an audio environment on the SoundEffects tab.