Gigabyte GA-P75-D3 - Page 73

- 73 - Appendix
If your chassis provides an AC'97 front panel audio module,
to activate the AC'97 functionality, click the tool icon on the
SpeakerConfiguration tab. On the ConnectorSettings
dialog box, select the Disablefrontpaneljackdetection
check box. Click OK to complete.
Click Device advanced settings on the top right corner
on the Speaker Configuration tab to open the Device
advancedsettings dialog box. Select the Mutetherear
outputdevice,whenafrontheadphonepluggedin check
box. Click OK to complete.
C.ActivatinganAC'97FrontPanelAudioModule
D.MutingtheBackPanelAudio(ForHDAudioOnly)