Gigabyte GA-VM900M - Page 62

GA-VM900M Motherboard - 62 -
English
D. Serial Number View:
Highlight Serial Number View and press ENTER. Use the ARROW keys to select a drive, and the
selected drive's serial number can be viewed at the bottom line (Figure 11). The serial number is
assigned by the disk drive manufacturer .
Figure 11
Figure 12
E. Delete Array:
If you want to delete an existing array, select Delete Array in Main Menu and press ENTER. Press
ENTER on the array to be deleted. A warning message will show up, press Y to confirm or press N to
cancel (Figure 12).
Deleting a disk array will destroy all the data on the disk array except for RAID 1 array(s). When a RAID
1 array is deleted, the data on the two hard drives will be reserved and the two hard drives will become
two normal drives.
View the serial number of
hard disks, it is userful for
identify same model disks.
F1 : View Array/disk Status
KK
KK
K ,
LL
LL
L : Move to next item
Enter : Confirm the selection
ESC : Exit
XX
XX
X Create Array
XX
XX
X Delete Array
XX
XX
X Select/Clear Boot Array
XX
XX
X Serial Number View
Dev. Posi. Drive Name Array Name Mode Size(GB) Status
Channel0 Master ST3120026AS Array0 SATA 111.79 Stripe
Channle1 Master ST3120026AS Array0 SATA 111.79 Stripe1
Serial Number: 3JT329JX
VIA VT8237S V-RAID Utility V1.20
Delete a RAID array contain
the hard disks attached to
VIA RAID controller
F1 : View Array/disk Status
KK
KK
K ,
LL
LL
L : Move to next item
Enter : Confirm the selection
ESC : Exit
XX
XX
X Create Array
XX
XX
X Delete Array
XX
XX
X Select/Clear Boot Array
XX
XX
X Serial Number View
Data on the raid will be destroyed.
Continue? (Y/N)
Array No. Array Type Stripe Size Cap. (GB) Status
(b) Array 0 Stripe 64K 223.58 Normal
Channel0 Master ST3120026AS 111.79 Stripe0
Channel1 Master ST3120026AS 111.79 Stripe1
VIA VT8237S V-RAID Utility V1.20