Gigabyte GA-X38-DS4 User Manual

Appendix- 85 -
B. Installing Windows Vista
(The procedure below assumes that only one RAID array exists in your system.)
Step 1:
Restart your system to boot from the Windows Vista setup disk and perform standard OS installation
steps. When a screen similar to that below appears, select Load Driver. (Figure 6).
Step 2:
Specify the location where the driver is saved, such as your floppy disk (Figure 7).
Figure 7
Figure 6

Gigabyte GA-X38-DS4 Specifications

General

Brand	Gigabyte
Model	GA-X38-DS4
Category	Motherboard
Language	English