Gigabyte GA-Z170-Gaming K3 - Page 34

- 34 -
 CPU Fan Speed Control (CPU_FAN Connector)
Allows you to determine whether to enable the fan speed control function and adjust the
fan speed. Normal A llows the fan to run at different speeds according to the CPU
temperature. You can adjust the fan speed with System
Information Viewer based on your system
requirements. (Default) Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage item.
Full Speed Allows the fan to run at full speeds.
 Fan Speed Percentage
Allows you to control the fan speed. This
item is configurable only when CPU Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50
PWM value /
o
C.
 CPU OPT Fan Speed Control (CPU_OPT Connector)
Allows you to determine whether to enable the fan speed control function and adjust the
fan speed. Normal A llows the fan to run at different speeds according to the CPU
temperature. You can adjust the fan speed with System
Information Viewer based on your system
requirements. (Default) Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed
Percentage item. Full Speed Allows the fan to run at full speeds.
Fan Speed Percentage
Allows you to control the fan speed. This item
is configurable only when CPU OPT Fan Speed
Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50 PWM
value /
o
C.  1st System Fan Speed Control (SYS_FAN1
Connector)
Allows you to determine whether to enable the fan speed control function and adjust the
fan speed. Normal Allows the fan to run at different speeds according to the system
temperature. You can adjust the fan speed with System Information Viewer based on
your system requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage
item.
Full Speed Allows the fan to run at full speeds.
 Fan Speed Percentage
Allows you to control the fan speed. This
item is configurable only when 1st System Fan
Speed Control is set to Manual. Options are: 0.75 PWM value /
o
C ~ 2.50
PWM value /
o
C.
 2nd System Fan Speed Control (SYS_FAN2 Connector)
Allows you to determine whether to enable the fan speed control function and adjust the
fan speed. Normal Allows the fan to run at different speeds according to the system
temperature. You can adjust the fan speed with System Information Viewer based on
your system requirements. (Default)
Silent Allows the fan to run at slow speeds.
Manual Allows you to control the fan speed under the Fan Speed Percentage
item.