Gigabyte GA-Z77X-UP5 TH - Page 48

BIOS Setup
- 48 -
& Vcore Loadline Calibration
Allows you to set the Load-Line Calibration level for the Vcore. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the Vcore more consistent
with what is set in BIOS under heavy load. Auto lets the BIOS automatically congure this setting and sets
the voltage following Intel's specications. (Default: Auto)
& GFX Voltage Loadline Calibration
Allows you to set the Load-Line Calibration level for the GFX voltage. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the GFX voltage more
consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically congure this setting
and sets the voltage following Intel's specications. (Default: Auto)
& DDR CH(A/B) Voltage Loadline Calibration
Allows you to set the Load-Line Calibration level for the GFX voltage. The levels are (from highest to lowest):
Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the GFX voltage more
consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically congure this setting
and sets the voltage following Intel's specications. (Default: Auto)
& CPU Vtt Loadline Calibration
Allows you to set the Load-Line Calibration level for the CPU Vtt voltage. The levels are (from highest
to lowest): Extreme, Turbo, High, Medium, Low, and Standard. Selecting a higher level keeps the CPU
Vtt voltage more consistent with what is set in BIOS under heavy load. Auto lets the BIOS automatically
congure this setting and sets the voltage following Intel's specications. (Default: Auto)
& Vcore Protection
Allows you to set the voltage limit on the Vcore for over-voltage protection. The adjustable range is from
150.0mV to 300.0mV. Auto lets the BIOS automatically congure this setting. (Default: Auto)
& CPU Vtt Protection
Allows you to set the voltage limit on the CPU Vtt voltage for over-voltage protection. The adjustable range
is from 150.0mV to 300.0mV. Auto lets the BIOS automatically congure this setting. (Default: Auto)
& DDR CH(A/B) Voltage Protection
Allows you to set the voltage limit on Channel A and Channel B memory voltage for over-voltage protection.
The adjustable range is from 150.0mV to 300.0mV. Auto lets the BIOS automatically congure this setting.
(Default: Auto)
& Vcore Current Protection
Allows you to set the over-current protection level for the Vcore.
Auto Lets BIOS automatically congure this setting. (Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the Vcore.
& CPU Vtt Current Protection
Allows you to set the over-current protection level for the CPU Vtt voltage.
Auto Lets BIOS automatically congure this setting. (Default)
Standard~Extreme Selects Standard, Low, Medium, High, Turbo, or Extreme which represents different
level of over-current protection for the CPU Vtt voltage.