` Intel(R) Smart Connect Technology
& ISCT Conguration
Enables or disables Intel Smart Connect Technology. (Default: Disabled)
` Intel(R) Thunderbolt
& Wake From Thunderbolt Devices
Allows the system to be turned on by wake-up event from Thunderbolt device(s). (Default: Enabled)
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
& Reserved IO for Thunderbolt
Species how many I/O resources are to be reserved for Thunderbolt devices. Options are: 4K~48K.
(Default: 20K)
When set to 20K, each Thunderbolt port can be daisy chain around 3 Thunderbolt devices. The greater
size allows more Thunderbolt devices can be used. Each Thunderbolt port support up to 6 devices
(Note)
.
Due to PC architecture I/O resources limitation, when set to 48K, the SATA ports controlled by the Marvell
SE9172 controller will be disabled.
(Note) Due to PC architecture I/O resources limitation, the amount of the Thunderbolt devices can be used
is dependent on the quantity of PCI Express and PCI devices be installed. If a PCI Express graphics
card is installed, it is recommended that set Reserved IO for Thunderbolt to 40K or less.
To Next Page
Loading...
