Gigabyte M34WQ - Page 25

LCD Monitor User's Manual
-
25
-
KVM
Press to switch device.
To switch to USB Type-C input source, simply press the KVM button or
the Control button.
However, when there is no input signal from currently selected input
source, the system will return to the previous connected input source.
Note:
This option will be disabled if the KVM button function is dis-
abled (KVM OFF).
•
KVM Wizard: Congure the KVM related settings.
Set the input source to be bound with USB Type-B connection
rst, and then following with USB Type-C connection.
Select USB-B Display
HDMI 1
HDMI2
DisplayPort
Type-C
Select Enter
Select TYPE-C Display
HDMI 1
HDMI2
DisplayPort
Type-C
Select Enter
USB-B Display Selection TYPE-C Display Selection
Note:
If you set the USB-B Display setting to Type-C, the TYPE-C Dis-
play menu option will automatically be disabled. You will then see the
KVM status in the KVM Wizard page as below.
KVM Status
USB-B : Type-C
Type-C : N/A
•
KVM ON/OFF: Enable/Disable the KVM button function.