Gigabyte M8000X - Page 10

- 10 -
ENGLISH
4-5 Sensitivity Tab
Sensitivity
Asdefaultsetting,therearefoursensitivitystages:810,1620,3240,and6030DPI(dots
per inch). You can set preferred sensitivity value of four
sensitivity stages , then you can
switchitonthey.Check“setXandYaxisseparately”optiontoadjustX-Ysensitivity
levels
individually.
On-the-y sensitivity & Obvious Sensitivity Indicator
IfOn-The-Flysensitivityhasbeenassigned,easilyicktheOn-the-y“Up-Down”sensitivity
adjust button to cycle through the settings of fore sensitivity stage, and the 4-degree LED
indicator will show the current sensitivity selected. To speed up or slow down depends on your gaming situation.
Inrst-personshootinggames,programmingasmallerdpitrackingsensitivity(e.g.,400dpi)forsniping
andshootingisrecommended.Highersetting(e.g.,2000dpi)forquickermovements.
Report rate
The report rate determines the time intervals that your PC retrieves data from your mouse. You can set the report rate to
125Hz(8ms),250Hz(4ms),500Hz(2ms),or1000Hz(1ms)bymovingtheknobontheslider.
4-6 Scroll Tab
Youcanadjustvertical&horizontalscrollwheelspeedbymovingtheknobontheslider.
4-7 Windows Tab
Click the Windows tab link to Window
®
Mouse Control Panel directly.