Gigabyte MS03-CE0 - Upi Configuration

- 57 -
BIOS Setup
2-3-3 UPI Conguration
Parameter
Description
UPIGeneralConguration
Press[Enter]tocongureadvanceditems.

UPI Status
– Press [Enter] to view the Uncore status.

Link Frequency Select
– Selects the UPI link frequency.
– Options available: 12.8GT/s, 14.4GT/s, 16.0GT/s, Auto, Use Per Link
Setting. Default setting is Auto.

SNC
– Enable/Disable Sub NUMA Cluster function.
– Options available: Auto, Disable, Enable SNC2 (2-clusters), Enable
SNC4 (4-clusters). Default setting is Auto.

Stale AtoS
– Enable/Disable Stale A to S directory optimization.
– Options available: Disable, Enable, Auto. Default setting is Auto.

LLC dead line alloc
– Enable/DisablelldeadlinesinLLC.
– Options available: Disable, Enable, Auto. Default setting is Enable.

MMIO High Base
– Options available: 56T, 40T, 32T, 24T, 16T, 4T, 2T, 1T, 512G, 3584T.
Default setting is 32T.