Gigabyte MS73-HB2 - Installing and Removing a Memory Module; Memory Population Table; Processor and Memory Module Matrix Table

- 15 -
Hardware Installation
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR5 DIMMs on this motherboard.
1
2
2
Follow these instructions to install a DIMM module:
1. Insert the DIMM memory module vertically into the DIMM slot and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
1-4-3 Memory Population Table
Type
Ranks Per DIMM
and Data Width
DIMM
Capacity
(GB)
Speed (MT/s); Voltage (V);
DIMM per Channel (DPC)
1DPC*
16Gb 1.1V
RDIMM
SRx8 (RC D) 16GB
4800
SRx4 (RC C) 32GB
SRx4 (RC F) 9x4 32GB
DRx8 (RC E) 32GB
DRx4 (RC A) 64GB
DRx4 (RC B) 9x4 64GB
RDIMM 3DS
(4R/8R)x4
(RC A)
2H-128GB
4H-256GB
*1DPC applies to 1SPC or 2SPC implementations (SPC - Sockets Per Channel)
1-4-4 Processor and Memory Module Matrix Table
4 DIMM
Memory Q’ty
for each CPU
CPU1
L0 K0
J0
I0
M0
N0
O0 P0
V
1 DIMM
2 DIMM
6 DIMM
8 DIMM
V
V V
VVVV
V VV
V
V
V
VVVV
VVV
CPU0
H0 G0 F0 E0 A0 B0 C0 D0
V
V V
VVVV
VV V V VVV
VV V V V V
V
NOTE!
l
There should be at least one DDR5 DIMM per socket.