- 23 - Hardware Installation
2-6-1 Installing Add-on Card (Optional)
Follow these instructions to install Add-on card:
1. Remove theriser bracket from the system following the steps outlined in 2-6 Installing the PCI
Expansion Card.
2. Remove the PCI bracket and mini PCI card.
3. Insert the dedicated rear bracket and secure with screw.
4. Engage the support bracket with mezzaine card and secure with screws.
5. Attach the interposer card to the selected slot (PCIE_4).
6. Insert the add-on card into the interposer card. Make sure that the card is properly seated.
7. Tighten the thumbscrew.
1
2
3
5
4
6
To Next Page
Loading...
