Gigabyte R180-F2A - Front Panel LED and Buttons

- 29 - Hardware Installation
3
4
2
1
5
6
No. Name Color Status Critical
Event
Description
1.
Reset Button Press the button to reset the system.
2.
ID Button
Press the button to activate
system identication.
3.
Power LED
Green Solid On N/A System is powered on
Green Blink N/A System is in ACPI S1 state (sleep mode)
N/A Off N/A
• System is not powered on or in ACPI S5
state (power off)
• System is in ACPI S4 state
(hibernate mode)
4.
HDD Status
LED
Green
On N/A HDD locate
Blink N/A HDD access
Amber On N/A HDD fault
Green/
Amber
Blink N/A HDD rebuilding
N/A Off N/A
• No HDD access
• No HDD fault
5.
LAN1 Active/
Link LED
Green
Solid On N/A
Link between system and network
or no access
Green Blink N/A Data transmission or receiving is occurring
N/A Off N/A
No data transmission or
receiving is occurring
6.
LAN2 Active/
Link LED
Green
Solid On N/A
Link between system and network
or no access
Green Blink N/A Data transmission or receiving is occurring
N/A Off N/A
No data transmission or
receiving is occurring
3-3 Front Panel LED and Buttons