Gigabyte R280-F2O - Page 13

Hardware Installation - 13 -
Rear Panel I/O w 2 x USB 3.0 ports
w 2 x USB 2.0 ports
w RJ-45 COM port
w 3 x RJ-45 ports (1 x 10/100/1000 dedicated management LAN port)
w 1 x VGA port
w 1 x ID button
Front Panel
LED/Buttons
w 1 x Power button/LED
w 1 x ID Switch button/LED
w 1 x Reset button
w 2 x LAN LED
w 1 x System status LED
w 1 x HDD status LED
I/O Controller w ASPEED
®
AST2400 BMC chip
Hardware
Monitor
w System voltage detection
w CPU/System temperature detection
w CPU/System fan speed detection
w CPU/System fan speed control
* Whether the CPU/system fan speed control function is supported will depend on
the CPU/system cooler you install.
BIOS w 1 x 128 Mbit ash
w AMI BIOS
Environment
Ambient
Temperature
Relative
Humidity
w Operating Temperature: 10
o
C to 35
o
C
w Non-operating Temperature: -40
o
C to 60
o
C
w Operating Humidity: 8-80% operating Humidity (non-condensing)
w Non-operating Humidity: 20-95% operating Humidity (non-condensing)
System
Dimension
w 430Wx87Hx710D (mm)
Electrical
Power Supply
(R280-F2O/
R280-A3C/
R280-F3C)
w 2 x Redundant 800W 200-240VAC at 80 plus platinum
Electrical
Power Supply
(R280-G2O)
w 2 x Redundant 1600W 200-240VAC at 80 plus platinum
* GIGABYTE reserves the right to make any changes to the product specications and product-related information
without prior notice.