en ar 7
Gigaset A540 / en / A31008-M2601-A701-1-UZ19 / starting.fm / 31.07.2014
A-Klasse_Layout_Neu, Version 4, 28.05.2014
Getting started
Display language
¤ Menu ¤ q Settings ¤ OK ¤ q Language ¤ OK ¤ . . . select language with q ¤ OK (³ = selected)
Registering the handset
Handsets contained in the package have already been registered to the base.
If, however, a handset has not been registered (display "Register handset" or "Place handset into base"), you
must register it to the base.
• Registering automatically to Gigaset A540 base
¤ Place the handset into the base
Date and time
Set the date/time so that the correct date and time can be assigned to incoming calls, and so that you can use
the alarm.
The telephone is now ready for use.
i
If you do not understand the language currently set:
¤ v ¤ L4 ¤ . . . select language with q ¤ OK (³ = selected)
i
If automatic registration does not work, the handset will have to be registered manually (¢ page 18).
During set up:
¤ Time ¤ . . . set date with ~ ¤ OK ¤ . . . set time with ~ ¤ OK
During later use:
¤ Menu ¤ q Settings ¤ OK ¤ Date/Time ¤ OK ¤ . . . set date
with ~
¤ OK ¤ . . . set time with ~ ¤ OK
To Next Page
Loading...
