Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Extending the functionality of the phone
Gigaset A690-A690A/AS690-AS690A / LUG-Kombi IE-UK (Amazon) en / A31008-M2816-L141-1-7619 / extending.fm / 2/19/
30
Extending the functionality of the phone
Multiple handsets
Up to four handsets can be registered with the base.
Every device is assigned an internal name and internal number (INT 1 – INT 4). The assignment
ca
n be changed.
All internal numbers are already assigned: De
-register any devices no longer needed
Registering a handset
Register HS or Put into base flashes on the display.
Registering by placing the handset in the base
Place the handset in the base . . . Registering is shown on the display, the handset is regis-
tered automatically
Registering from the menu
On the handset
Menu Settings OK Handset OK Register HS Enter the system PIN
of the base (default: 0000) OK The display shows Registering.
On the base
Within 60 seconds of entering the system PIN, press and hold the registration/paging key for
a minimum of 3 seconds.
De-registering a handset
You can de-register any other registered handset from any registered Gigaset handset.
Menu Settings OK Handset OK De-register HS OK
Select the internal user to be de-registered. (The handset you are currently using is
marked with <.) OK Enter the system PIN of the base (default: 0000) OK . . . the
handset is registered. Put into base flashes on the display
Registration must be initiated both on the base and on the handset. Both must be
within 60 seconds.
The registration process takes about 1 minute. Handsets are assigned the lowest avail-
able internal number (1 to 4). If internal numbers 1 to 4 are already assigned to other
devices, number 4 is overwritten.
To Next Page
Loading...
