Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Phone settings
Gigaset A690-A690A/AS690-AS690A / LUG-Kombi IE-UK (Amazon) en / A31008-M2816-L141-1-7619 / settings.fm / 2/19/21
36
Setting the time period
For the handset:
Menu Settings OK Handset OK Time Control OK
Settings OK Off from: Enter the 4-digit time OK Off until: Enter the 4-
digit time OK
Off for anonymous calls
You can set your handset so that it does not ring for calls where Calling Line Identification
has been withheld. The call is only signalled on
the display.
Menu Settings OK Handset OK An.Call Silent OK ( = enabled)
System
Changing the system PIN
Menu Settings OK Base OK System PIN OK Enter the
current 4-digit system PIN (default: 0000) OK Enter the new 4-digit system PIN OK
Resetting the system PIN
Resetting the base to the original PIN code 0000:
Remove the power cable from the base Keep pressed the Registration/paging key on the
base At the same time, reconnect the power cable to the base
Press and hold the key for
at least 5 seconds . . . The base is reset and the system PIN is set to 0000
Resetting the handset
You can reset individual settings. Entries in the directory and call list, and the handset’s registra-
tion to the base, are maintained.
Menu Settings OK Handset OK Reset Handset OK Reset?
OK
For the base (with answer machine):
Menu Settings Base OK Audio Settings OK Time Control
OK Settings OK Off from: Enter the 4-digit time OK Off until: Enter
the 4-digit time OK
All handsets are de-registered and must be re-registered. All settings are reset to the
defaults.
To Next Page
Loading...
