Gigaset A690-A690A/AS690-AS690A / LUG-Kombi IE-UK (Amazon) en / A31008-M2816-L141-1-7619 / settings.fm / 2/19/21
Template Module, Version 2.1, 11.08.2020 / Template Basiseinstellungen: Version 3.1 - 07.07.2020
Phone settings
37
Resetting the base
The system PIN is reset to the original code 0000.
The time and date are not affected. The answer machine (if a
vailable) is not ready until after
about 15 seconds after the base is reset.
Resetting the base from the menu
The handsets remain registered. The system PIN is not reset.
Menu Settings OK Base OK Base Reset OK Reset? OK
Resetting the base using a key on the base
All handsets are de-registered. The system PIN is set back to the original code 0000.
Remove the power cable from the base Keep pressed the Registration/paging key on the
base At the same time, reconnect the power cable to the base Keep the key pressed
for at least another 5 seconds
A reset disables mode No Radiation, resets individual settings and deletes all lists.
To Next Page
Loading...
