Gigaset DA410 - Speed Dialling

4
en
Gi
gaset
DA
410
/
en en
/
A
30054-
M
6529-
R
101-2-6
Z
19
/
DA
410_en_
IM
-
EU
.
f
m
/
29.11.2011
Speed dialling
You can save 4 numbers on the rep-
ertory keys and 10 numbers for
speed dial on the number keys (0... 9)
(each with max. 32 digits).
Storing a number
c K Lift the handset, press
the set key.
either ... via repertory key
B Press the repertory
key.
or ... via speed dial
J Q ... O
Press the speed dial
key and then choose a
speed dial number.
Then
~ Enter the phone
number for the reper-
tory key or speed dial.
You can now store further numbers
by pressing the repertory or speed
dial key sequence again and repeat-
ing the process.
K & Press the set key, hang
up the handset.
Dialling a number
Via repertory key
c B Lift the handset, press
the repertory key.
You can extend the dialled number
by entering additional digits.
Via a speed dial number
c J Lift the handset, press
the speed dial key.
Q ... O Press the speed dial
number key.
Deleting a number
c K Lift the handset, press
the set key.
either ...
B Press the repertory
key.
or ...
J Q ... O
Press the speed dial
key and then the
speed dial number.
K & Press the set key, hang
up the handset.
Notes
When storing and deleting repertory
and speed dial numbers, please note
the following:
u You can also save the number of
the person you are talking to
during a call.
u
* and # are saved regard-
less of the set dialling mode but
are only dialled with tone dial-
ling mode (
£ page 6).
u If the number entered is longer
than 32 digits, only the first 32
digits are stored.
Dialling pauses
One or more dialling pauses can be
entered using
I (not at 1st digit).
Pauses are transferred to the mem-
ory and are necessary for certain
extension systems
(e.g. 0
I 2368).
The length of the pause can be set to
1, 3 or 6 seconds (
£ page 8).