EasyManua.ls Logo

Gigaset DA410 - Adjusting the Telephone

Gigaset DA410
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
en
Gi
gaset
DA
410
/
en en
/
A
30054-
M
6529-
R
101-2-6
Z
19
/
DA
410_en_
IM
-
EU
.
f
m
/
29.11.2011
Adjusting the telephone
Setting the handset or headset
volume
The volume can be set to three levels.
During a call
E / D Adjust the volume
with the loud/quiet
key.
In idle mode
You can also adjust the handset vol-
ume in idle mode.
c K O
Lift the handset, press
the set key, press the
number 9 key.
... 3 Select volume.
K & Press the set key, hang
up the handset.
Mute
You can deactivate the telephone's
microphone (and earpiece) during a
call.
C Press the mute key to
deactivate or reacti-
vate the microphone.
In mute mode a melody can be
played.
Setting the mute function,
(
£ page 8).
Adjusting the speaker
During handsfree talking you can set
the volume to seven levels.
E / D Adjust the volume
with the loud/quiet
key.
Activating/deactivating open
listening
People present in the room can listen
to the call via speaker.
During the call:
A Press the handsfree
key to activate or deac-
tivate open listening.
Open listening is activated when the
speaker is activated and the handset
is lifted. This deactivates the micro-
phone.
Handsfree talking via microphone is
activated when the speaker is acti-
vated and the handset is hung up.
Activating/deactivating
handsfree talking
You can also telephone via micro-
phone if the handset is hung up. The
optimum distance to the micro-
phone is about 50 cm.
Activating during a call
A & Hang up the handset
with the handsfree key
pressed.
Activating before dialling
A Press the handsfree
key until the dialling
tone is audible.
Deactivating handsfree talking
c Lift the handset during
the call. The call is
switched to the hand-
set.
Ending the call
A During a call via
speaker, press the
speaker key.
If a headset is connected, handsfree
talking and open listening are not
possible.

Related product manuals