Gigaset Dune - Operating a Repeater; Changing the System PIN

33
Gigaset CL540-CL540A / LUG - UK-IE / A31008-M2602-L101-2-7619 / settings.fm / 5/14/14
Template Borneo, Version 1, 21.06.2012
Operating a repeater
Operating a repeater
You can use the Gigaset Repeater to increase the range of your Gigaset handset.
The function and setting of your repeater depends
on the repeater version used. The repeater
version can be identified by the item number on the product label:
Gigaset Repeater (earlier than version 2.0) S30853-S601-..
.
Gigaset Repeater 2.0 S30853-S602-..
.
For additional information, see the repeater user guide and our website at
www.gigaset.com/gigasetrepeater
Gigaset Repeater (earlier than version 2.0)
Prerequisites:
u EC
O DECT function Maximum Range must be activated.
u ECO DECT function No Radiation must be deactivated.
u Encryption must be deactivated:
v
¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Encryption ¤ Change (´ = deactivated)
Modifying the ECO DECT functions
¢ page 34.
Registering a repeater:
¤Connect the repeater to the mains power supply. ¤ Press and hold (min. 3 secs) the
Registration/Paging key on the base (CL540A
¢ page 2,
CL540
¢ page 3). ¤ The repeater registers automatically.
You can register up to 6 repeaters.
Gigaset Repeater 2.0
Registering the Gigaset Repeater 2.0:
¤Connect the repeater to the mains power supply. ¤ Press and hold (min. 3 secs) the
Registration/Paging key on the base (CL540A
¢ page 2, CL540 ¢ page 3). ¤ The repeater reg-
isters automatically.
You can register a maximum of 2 Gigaset Repeaters 2.0.
The ECO DECT function Maximum R
ange is activated and No Radiation is deactivated. The set-
tings cannot be changed whilst the repeater is registered.
De-registering the Gigaset Repeater 2.0:
v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Repeater ¤ OK ¤ q Select repeater. ¤ De-reg.
Changing the system PIN
v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q System PIN ¤ OK
¤ If current PIN not 0000: enter current PIN ¤ OK
¤ Enter new system PIN (4 digits; 0 - 9) ¤ Save
Resetting system PIN
If you have forgotten your system PIN, you can reset it to 0000. If you do this, all the base
settings will be reset and all the handsets will be de-registered!