Gigaset Dune - Operating the Telephone on a Router;Pabx

51
Gigaset CL540-CL540A / LUG - UK-IE / A31008-M2602-L101-2-7619 / PABX.fm / 5/14/14
Template Borneo, Version 1, 21.06.2012
Operating the telephone on a router/PABX
Operating the telephone on a router/PABX
Operation with a router
When operating on the analogue connection of a router, potentially occurring echoes can be
reduced by switching on XES mode 1
*
. If XES mode 1 does not suppress the echoes sufficiently,
you can activate XES
mode 2.
If there are no problems with echoes, the normal mode (fac
tory settings) should be activated.
v
¤ *#Q5#MQ
¤ Q ¤ OK (for normal mode)
¤  ¤ OK (for XES mode 1)
¤ 2 ¤ OK (for XES mode 2)
Operation with a PABX
To find out which settings are required for your PABX, please refer to the PABX user guide.
Dialling modes and flash time
Changing the dialling mode
v ¤ Ï ¤ OK ¤ q Telephony ¤ OK ¤ q Dialling Mode ¤ OK ¤ q Select tone dialling
(Ton e)/ pulse dialling (Pulse)
¤ Select (Ø = selected)
Setting flash time
v ¤ Ï ¤ OK ¤ q Telephony ¤ OK ¤ q Recall ¤ OK ¤ q Select flash time
¤ Select (Ø = selected)
Saving an access code (outside line code)
If you have to enter an access code before any external number on your PABX, e.g., "0":
v
¤ Ï ¤ OK ¤ q Telephony ¤ OK ¤ q Access Code ¤ OK
¤ Access external line with: Enter access code (max. of 3 characters).
¤ For:
r Off: D
eactivate access code.
Or:
r Call Lists: Th
e access code should only be prefixed when dialling from one of the follow-
ing lists: missed call list, accepted call l
ist, answer machine list (Gigaset CL540A).
Or:
r All calls: T
he access code should be prefixed to every number.
¤ Save
* XES stands for "eXtended Echo Suppression".