34
Gigaset CL540-CL540A / LUG - UK-IE / A31008-M2602-L101-2-7619 / settings.fm / 5/14/14
Template Borneo, Version 1, 21.06.2012
Restoring phone to default setting
¤ Remove the power cord from the base.
¤ Press and hold the Registration/Paging key (CL540A ¢ page 2, CL540 ¢ page 3) and at the
same time reconnect the power cord to the base.
¤ Hold the Registration/paging key for at least 5 seconds.
Restoring phone to default setting
You can reset individual modifications to base and handset settings separately.
The following are not af
fected by the reset:
u Date
/ time,
u Registration of handsets to the base and the current selection of the base,
u System PIN,
u Entries in the calendar and phonebook,
u Redial list.
When resetting the handset (H
andset Reset), audio and display settings will be deleted.
When resetting the base (Bas
e Reset), ECO DECT, answer machine, system settings and internal
handset names, as well as call lists/answer machine lists, will be reset
Resetting the handset/base station
v ¤ Ï ¤ OK ¤ q System ¤ OK ¤ q Handset Reset / Base Reset ¤ For Base Reset:
Enter the system PIN
¤ OK ¤ Confirm security prompt with Ye s
ECO DECT
ECO DECT uses less energy and reduces transmission power.
Reducing transmission power (radiation)
In normal operation (default setting):
The device range is set to maximum as default. This guarantees optimum wireless management.
In idle status, the handset will not function (as it is not transmitting). Only the base will maintain
contact with the handset via a low wireless signal. During a call, the transmission power
automatically adapts to the distance between the base and handset. A closer distance to the
base means lower transmission power.
You can reduce the transmission power even further:
1) Reducing the range and thereby lowering transmission power by up
to 80%
In many spaces such as apartments, business rooms and offices, the maximum range is not
necessary. If you deactivate the Maximum Range setting, you can reduce the transmission
power during a call by up to 80%, using half of the range.
v
¤ Ï ¤ OK ¤ q ECO DECT ¤ OK ¤ Maximum Range ¤ Change (³ = activated)
Display icon for reduced range
¢ page 53.
This setting cannot be used with a repeater (
¢ page 33).
To Next Page
Loading...
