Gigaset E550 - Operating the Base on the PABX

58
Gigaset E550/E550 A / UK-IE en / A31008-M2504-L101-1-7619 / T-NetBox_SAG-registration.fm / 4/20/15
A-Klasse_Layout_Neu, Version 4, 28.05.2014
Adjusting the telephone
Changing ringers
•Volume:
Five volume levels (1–5; e.g., volume 3 = ˆ) and "Off" (volume 0 = ‡).
•Melody:
List of pre-loaded ringer melodies. The first three melodies are the "classic" ring-
tones.
• Time control:
You can specify a time period when you do not want the telephone to signal exter-
nal calls e.g., during the night.
¤ §Menu§ ¤ q Settings ¤ §OK§ ¤ q Audio / Visual Signals ¤ §OK§
¤ q Base Audio Settings ¤ §OK§ ¤ q Ringer Volume / Ringtones / Time
Control
¤ §OK§
If Ringer Volume / Ringtones is selected:
¤ q (Select volume/melody) ¤ §OK§ (³= melody selected)
If Time Control is selected, activate and set time control:
¤ q Activation ¤ §OK§ (³= activated)
¤ q Settings ¤ §OK§ ¤ Starting Time: /Ending Time:
Enter each time as a 4-digit number and press §OK§.
Resetting the base to the default settings
When the settings are restored:
• Date and time are retained
• Handsets are still registered
• Eco Mode and Eco Mode+ is deactivated
• The system PIN is not reset.
¤ §Menu§ ¤ q Settings ¤ §OK§ ¤ q System ¤ §OK§ ¤ q Reset Base ¤ §OK§
Operating the base on the PABX
The following settings are only necessary if your PABX requires them; see the PABX
user guide.
Changing the dialling mode
§Menu§
¤ P#Q5#11 ¤ Enter digit for the dialling mode:
Q = tone dialling (DTMF); 1 = pulse dialling (PD)
¤ §OK§.
i
The answer machine is ready for use approx. 15 seconds after the base has
been connected or reset.