Gigaset Fusion - Managing certificates; Server certificates; Client certificate

Template Module, Version 2.2, 15.11.2022 / Version - 29.11.2022
Network
Gigaset Fusion / LUG IE-UK-International en / A31008-XXXXX-XXXX-X-XXXX / settings_advanced.fm / 12/16/22
92
Managing certificates
The phone supports the establishment of secure (encrypted) data connections on the Internet
with the TLS security protocol (Transport Layer Security). With TLS, the client (the phone) uses
certificates to identify the server. The certificates are used to certify the electronic identity of the
communication partners. These certificates must be stored on the phone.
There are server and client certificates. With server certificates, the operator of a website is
authenticated by the client. With a client certificate, the client identifies itself as authorised to
access a server website.
Server certificates
In Web user interface
 Settings Network Security Certificates . . . The currently installed certificates
are listed
Show detailed certificate information:
 Click next to the certificate name Details
Delete certificate:
 Click next to the certificate name Remove
Load new certificate
 Drag the certificate file from your computer file system to the area next to File upload
If you have uploaded additional certificates, the memory used is displayed next to Memory
usage.
Client certificate
For a client certificate, you need a private key file as well as the certificate file.
 Settings Network Security Client Certificate . . . The currently installed certif-
icates are listed Upload client certificate as described above
Upload private key:
 Drag the private key file from your computer file system to the area next to File upload
If the private key is password-protected, it is displayed and can be changed if required.
Type: CA The certificate is confirmed by a trusted body (Certificate Authority or
Certification Authority).
Type: Invalid The certificate is not confirmed by a trusted body.
or:
 Browse file Select certificate file from file system File upload
or:
 Browse file Select private key file from file system File upload