EasyManua.ls Logo

GILBARCO VEEDER-ROOT Latitude LS-200 User Manual

Default Icon
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LATITUDE
Owner’s Manual
MDE-5422B

Table of Contents

Other manuals for GILBARCO VEEDER-ROOT Latitude LS-200

Question and Answer IconNeed help?

Do you have a question about the GILBARCO VEEDER-ROOT Latitude LS-200 and is the answer not in the manual?

GILBARCO VEEDER-ROOT Latitude LS-200 Specifications

General IconGeneral
BrandGILBARCO VEEDER-ROOT
ModelLatitude LS-200
CategoryPetrol Station Equipment
LanguageEnglish

Summary

Important Safety Information

Safety Precautions and Procedures

Covers preliminary, emergency, access, and evacuation safety measures.

Hazardous Environment Safety

Addresses fire, spark, electrical, and material hazards during operation.

Emergency Response

Procedures for handling emergencies and providing aid.

Hazardous Area Actions

Recommended actions to mitigate fuel-related hazards.

Latitude Operation

Setting Parameters

Setting Parameters Overview

Introduction to configuring unit settings and access levels.

User Menu Mode Operations

Navigating and utilizing the user menu for settings.

Setting Price via User Menu

Procedure for adjusting the fuel price using the user menu.

Command Code Mode and Level 1 Commands

Using command codes for basic operational settings.

Parameter 20: Setting PPU Values

Configuration of Price Per Unit (PPU) values.

Parameter 24: Operation Mode Settings

Configuring the dispenser's operating mode.

Level 2 Commands and Communication Settings

Service level commands and communication setup procedures.

Parameter 40.1: Setting Two-Wire ID

Configuring the dispenser's ID for two-wire communication.

Parameter 40.2: Setting Two-Wire Baud Rate

Setting the communication baud rate for two-wire connections.

Parameter 40 FC 20: IP Address Configuration

Configuring the network IP address for communication.

Parameter 40 FC 21: Subnet Mask Configuration

Configuring the network subnet mask.

Level 3 Commands and Decimal Point Settings

Advanced commands and adjusting display decimal points.

Level 4 Commands and VRM Enable

Highest level commands and enabling Vapor Recovery Monitoring.

Preliminary Steps for Service

Latitude Pump/Dispenser Maintenance

Troubleshooting

Related product manuals