Name: Gilera RCR 50
Brand: Gilera
Rating: 4 (1 reviews)

To Next Page

To Previous Page

N.B.

DO NOT USE SOLVENT, THINNER, PETROL OR OTHER ABRASIVE SCOURING

LIQUID WHICH COULD DAMAGE THE PROTECTION PAINT OF THE CHROME-

PLATING.

DIFFICULTY STARTING UP

Empty tank. Obstructed or dirty

filters, jets or fuel bodies.

Filling.

Dismantle and wash with petrol

Dry with pressured air

IGNITION FAULTS

The spark plug do not release

sparks. Have H.V. checked by

specialised technician.

Check the electrodes, adjustment

at 0,5 - 0,6 mm. Clean the

electrodes with pure petrol and a

metallic brush. Check if there is any

fracture or crack in the isolating

spark plug and replace if

necessary. If the spark plug is in

good condition, take your vehicle to

an Authorised Piaggio-Gilera

Service Centre.

Flooded engine Accelerate and try to start, even

pushing, make the engine work at

idle and eliminate excessive fuel,

clean the spark plug or replace it.

Check the sealing of the flotation

gear valve pin.

3 Maintenance

Questions and Answers:

Need help?

Do you have a question about the Gilera RCR 50 and is the answer not in the manual?

Gilera RCR 50 Specifications

General